This 1.2" Schedule 80 seamless brass pipe offers superior corrosion resistance and structural integrity for demanding fluid and gas conveyance systems.
| Standard | ASME B18 |
| Material | Brass |
| Finish | Plain |
| Grade | N/A |
| Pipe Size | 1.2" |
| Outside Diameter | 3.131" |
| Wall Thickness | 0.480" |
Specified by design engineers worldwide, this seamless brass pipe conforms to stringent industry standards for critical applications. Featuring a nominal pipe size of 1.2 inches (IPS), it boasts a precise outside diameter of 3.131 inches and a robust wall thickness of 0.480 inches, achieving the robust Schedule 80 rating. The inherent properties of brass, including excellent machinability, weldability, and resistance to dezincification and stress corrosion cracking, make it an optimal choice for systems handling corrosive fluids, elevated temperatures, and significant pressures in chemical processing, marine environments, and hydraulic systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure proper thread cleaning and preparation of mating fittings. 2. Apply appropriate thread sealant or tape suitable for brass and the specific media. 3. Tighten fittings to manufacturer's recommended torque specifications, avoiding over-tightening which can damage threads.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incompatible thread sealant for brass. | Always select thread sealants specifically rated for brass and the service fluid to prevent corrosion or degradation. |
| Over-tightening threaded connections. | Utilize a torque wrench and adhere to recommended torque values to prevent stripping threads or cracking the pipe end. |
A: This Seamless Pipe, Schedule 80 is manufactured from Brass.
A: Chemical Processing & Transfer, Marine & Offshore Systems, Hydraulic & Pneumatic Lines, Water Distribution & Treatment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||