This Schedule 80 seamless brass pipe offers superior strength and corrosion resistance. With a 3.7" nominal pipe size and 3.068" OD, it's ideal for high-pressure fluid and gas transfer systems requiring exceptional durability.
| Standard | ASTM A106 |
| Material | Brass |
| Finish | Anodized |
| Grade | N/A |
| Pipe Size | 3.7" |
| Outside Diameter | 3.068" |
| Wall Thickness | 0.460" |
Engineered for reliability and performance, this 3.7" Schedule 80 seamless brass pipe boasts an outside diameter of 3.068" and a robust wall thickness of 0.460". Crafted from high-grade brass, it exhibits excellent corrosion resistance, especially against water, petroleum products, and many chemicals. The seamless construction ensures maximum integrity, preventing leaks and failures under high pressure and temperature conditions. Its robust design makes it suitable for demanding industrial, marine, and chemical processing applications where consistent performance is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure all mating surfaces are clean and free from debris. 2. Apply appropriate pipe sealant or PTFE tape to the male threads. 3. Carefully thread the pipe into the fitting, ensuring a snug, hand-tight fit before wrenching an additional 1-2 turns.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force when threading, leading to stripped threads or pipe damage. | Tighten fittings securely but avoid over-tightening. Consult recommended torque values if available. |
| Failing to properly clean mating surfaces, resulting in potential leaks. | Thoroughly inspect and clean both the pipe threads and the fitting interior before assembly. |
A: This Seamless Pipe, Schedule 80 is manufactured from Brass.
A: High-pressure fluid transfer systems, Chemical processing pipelines, Marine and offshore applications.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||