This Schedule 80 brass seamless pipe offers exceptional strength and corrosion resistance. Engineered for high-pressure systems, it ensures reliable fluid and gas transfer in demanding environments.
| Standard | ISO 9001 |
| Material | Brass |
| Finish | Zinc Plated |
| Grade | N/A |
| Pipe Size | 2.5" |
| Outside Diameter | 2.280" |
| Wall Thickness | 0.495" |
Manufactured under strict quality controls, this 2.5" nominal pipe size (NPS) seamless pipe boasts an actual outside diameter of 2.280 inches and a robust 0.495-inch wall thickness, adhering to Schedule 80 specifications. Constructed from high-grade brass, it exhibits excellent machinability and superior resistance to corrosion from a wide range of fluids, making it ideal for applications involving water, oil, and certain chemicals. Its seamless construction eliminates potential leak paths, ensuring integrity under significant pressure and vibration.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating surfaces are clean and free of debris. 2. Apply appropriate thread sealant or tape to male threads. 3. Hand-tighten fittings, then use a wrench to tighten an additional 1-2 turns for secure, leak-free connections.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using the wrong thread sealant for the fluid being conveyed. | Consult chemical compatibility charts to select a sealant appropriate for brass and the specific media. |
| Over-tightening fittings, which can crack the pipe or fitting. | Tighten fittings until snug, then apply a partial turn with a wrench to ensure a seal without excessive force. |
A: This Seamless Pipe, Schedule 80 is manufactured from Brass.
A: Industrial fluid transfer systems, Hydraulic lines requiring corrosion resistance, Marine plumbing and fuel lines.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||