This Schedule 80 seamless brass pipe offers superior corrosion resistance and structural integrity. Its precise dimensions and robust material make it ideal for high-pressure fluid transport in challenging industrial settings.
| Standard | ASTM A106 |
| Material | Brass |
| Finish | Anodized |
| Grade | N/A |
| Pipe Size | 1.3" |
| Outside Diameter | 2.680" |
| Wall Thickness | 0.162" |
Engineered for reliability and performance, this 1.3" nominal pipe size (NPS) seamless brass pipe features an outside diameter of 2.680" and a robust 0.162" wall thickness, conforming to Schedule 80 specifications. The inherent properties of brass, including excellent corrosion resistance to a wide range of chemicals and saltwater, combined with its high strength-to-weight ratio, ensure long-term service life in demanding applications. Its seamless construction eliminates potential leak paths found in welded pipes, providing a critical advantage in systems where integrity is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure pipe ends are clean and free of debris. 2. Apply appropriate brass-compatible threading compound to male threads. 3. Screw the fitting onto the pipe, tightening to a snug fit followed by an additional 1/4 to 1/2 turn, avoiding overtightening.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard pipe sealant on brass fittings. | Utilize a thread sealant specifically formulated for brass or compatible with brass alloys to prevent galvanic corrosion. |
| Overtightening fittings, which can crack the brass. | Tighten fittings firmly but avoid excessive force. Consult specific fitting manufacturer recommendations for torque values if available. |
A: This Seamless Pipe, Schedule 80 is manufactured from Brass.
A: Industrial fluid transfer systems, Marine applications, Corrosive chemical handling.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||