This premium brass Schedule 80 seamless pipe offers exceptional strength and corrosion resistance. Engineered for high-pressure fluid and gas conveyance, it ensures reliable performance in demanding industrial environments.
| Standard | ASME B18 |
| Material | Brass |
| Finish | Black Oxide |
| Grade | N/A |
| Pipe Size | 1.3" |
| Outside Diameter | 3.228" |
| Wall Thickness | 0.400" |
Manufactured under strict quality controls, this seamless brass pipe conforms to Schedule 80 specifications, ensuring robust performance. With an internal diameter (ID) of 1.3 inches and an outside diameter (OD) of 3.228 inches, it boasts a substantial wall thickness of 0.400 inches. This construction provides superior mechanical strength and pressure rating, making it ideal for applications requiring resistance to corrosive media and elevated operational pressures, such as in chemical processing, hydraulic systems, and marine environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating surfaces of fittings are clean and free of debris. 2. Apply appropriate sealant or tape to pipe threads if required by the fitting type. 3. Thread pipe into fitting hand-tight, then use a wrench for final tightening, avoiding over-tightening.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force during tightening, which can damage threads or the pipe. | Tighten fittings until snug, then apply an additional quarter to half turn with a wrench. Consult fitting manufacturer specifications for precise torque values. |
| Not ensuring proper alignment between pipe and fitting, leading to cross-threading. | Start threading the pipe by hand to confirm correct alignment before using tools. If resistance is met, back out and re-align. |
A: This Seamless Pipe, Schedule 80 is manufactured from Brass.
A: High-pressure fluid transfer, Hydraulic systems, Chemical processing lines.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||