This Schedule 80 brass seamless pipe delivers exceptional performance in demanding environments. Its robust construction and corrosion resistance make it ideal for critical fluid and gas transfer systems.
| Standard | ASME B18 |
| Material | Brass |
| Finish | Galvanized |
| Grade | N/A |
| Pipe Size | 1.1" |
| Outside Diameter | 6.200" |
| Wall Thickness | 0.441" |
Precision-manufactured to tight tolerances, this 1.1" nominal pipe size (NPS) brass seamless pipe features an outside diameter of 6.200" and a substantial wall thickness of 0.441". Conforming to Schedule 80 dimensional standards, this ensures a high burst pressure rating and excellent mechanical strength. The inherent properties of brass, including its resistance to corrosion from various fluids and its good machinability, make this pipe suitable for applications involving potable water, corrosive chemicals, and moderate temperature ranges. Its seamless construction eliminates the weld seam, guaranteeing uniform wall thickness and enhanced integrity under pressure.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure pipe ends are clean and free of debris. 2. Apply appropriate thread sealant or flux to male threads before connecting fittings. 3. Tighten fittings securely to achieve a leak-proof seal, avoiding over-tightening which can damage threads or the pipe.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incompatible thread sealant or flux with brass. | Always use sealants and fluxes specifically designed for brass to prevent galvanic corrosion or material degradation. |
| Over-tightening fittings, leading to stress fractures or stripped threads. | Tighten fittings until snug, then apply an additional quarter-turn if necessary. Refer to fitting manufacturer specifications for torque values if available. |
A: This Seamless Pipe, Schedule 80 is manufactured from Brass.
A: High-pressure fluid transfer systems, Chemical processing equipment, Marine and offshore installations.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||