Engineered for demanding environments, this Schedule 80 brass seamless pipe offers superior corrosion resistance and strength for reliable fluid conveyance in critical industrial systems.
| Standard | ASTM A106 |
| Material | Brass |
| Finish | Plain |
| Grade | N/A |
| Pipe Size | 1.1" |
| Outside Diameter | 1.891" |
| Wall Thickness | 0.290" |
Purpose-built for heavy-duty applications, this seamless brass pipe conforms to Schedule 80 dimensional standards, featuring a nominal pipe size of 1.1 inches, an outside diameter of 1.891 inches, and a substantial wall thickness of 0.290 inches. Crafted from high-quality brass alloy, it exhibits excellent resistance to corrosion, dezincification, and erosion, making it suitable for handling a wide range of fluids and gases under elevated pressures and temperatures. Its seamless construction ensures uniform wall thickness and enhanced structural integrity, eliminating potential leak paths common in welded pipes. Ideal for hydraulic systems, chemical processing, marine applications, and high-pressure water distribution.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure proper pipe support and alignment before connection. 2. Apply appropriate threading compound or sealant to male threads. 3. Hand-tighten fittings, then use a wrench for a secure, leak-free connection (typically 1-1.5 turns past hand-tight, depending on fitting type).
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening threaded fittings, leading to stress fractures or thread damage. | Adhere to recommended torque specifications or use a calibrated wrench to avoid over-tightening. |
| Using incompatible sealants or tapes that can degrade brass or the conveyed fluid. | Utilize sealants specifically rated for brass and the intended service conditions. |
A: This Seamless Pipe, Schedule 80 is manufactured from Brass.
A: High-pressure hydraulic systems, Chemical processing and transfer, Marine and offshore fluid handling, Industrial water distribution.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||