This Brass Schedule 80 seamless pipe offers superior strength and corrosion resistance. Engineered for high-pressure applications, its robust construction ensures reliable performance in demanding environments.
| Standard | ISO 9001 |
| Material | Brass |
| Finish | Plain |
| Grade | N/A |
| Pipe Size | 0.9" |
| Outside Diameter | 1.780" |
| Wall Thickness | 0.123" |
Manufactured under strict quality controls, this 0.9" nominal size Brass Schedule 80 seamless pipe features an outside diameter of 1.780" and a wall thickness of 0.123". Composed of high-grade brass, it exhibits excellent machinability, good formability, and inherent resistance to corrosion, particularly in freshwater and mildly aggressive fluid systems. This specification is ideal for applications requiring a combination of strength and a non-ferrous material, such as in instrument air lines, low-pressure hydraulic systems, and general fluid conveyance where material integrity is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure pipe ends are clean and free of debris. 2. Properly prepare pipe ends for joining using appropriate fittings (e.g., threaded or brazed). 3. Securely connect the pipe to the system, maintaining alignment and avoiding over-tightening.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incompatible fittings, leading to leaks. | Always use brass fittings specifically designed for Schedule 80 pipe and the intended pressure and fluid type. |
| Over-tightening threaded connections, causing damage to the pipe or fitting. | Apply appropriate torque to threaded connections, using thread sealant or tape as recommended for the specific application. |
A: This Seamless Pipe, Schedule 80 is manufactured from Brass.
A: Instrumentation Tubing, Low-Pressure Hydraulic Lines, General Fluid Conveyance.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||