This Schedule 80 seamless brass pipe offers exceptional strength and corrosion resistance for critical fluid and gas transfer systems. Precision manufactured to exacting standards, it ensures reliable performance in demanding environments.
| Standard | ISO 9001 |
| Material | Brass |
| Finish | Plain |
| Grade | N/A |
| Pipe Size | 0.7" |
| Outside Diameter | 3.281" |
| Wall Thickness | 0.228" |
Trusted by engineers across multiple sectors, this 0.7" nominal pipe size (NPS) seamless brass pipe features a 3.281" outside diameter and a robust 0.228" wall thickness, conforming to Schedule 80 specifications. The inherent properties of brass, including excellent machinability and superior resistance to dezincification and saltwater corrosion, make it ideal for applications involving potable water, corrosive chemicals, and high-pressure systems where integrity is paramount. Its seamless construction eliminates weld defects, ensuring uniform wall thickness and enhanced structural integrity under thermal cycling and mechanical stress.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating surfaces are clean and free of debris. 2. Apply appropriate thread sealant or tape to male threads. 3. Carefully thread the pipe into the fitting, hand-tightening first, then using a wrench to achieve a secure, leak-free connection without over-tightening.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using the wrong thread sealant for brass fittings. | Always use thread sealants specifically rated for brass to prevent galvanic corrosion. |
| Over-tightening threaded connections, leading to potential cracking of the brass fitting or pipe. | Tighten connections until snug and a seal is confirmed, avoiding excessive force. |
A: This Seamless Pipe, Schedule 80 is manufactured from Brass.
A: Plumbing systems (potable water, drainage), Chemical processing and handling, Marine and offshore equipment, Instrumentation lines.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||