Engineered for demanding industrial environments, this Brass Schedule 40 seamless pipe offers superior corrosion resistance and mechanical strength. Its robust construction ensures reliable fluid and gas conveyance.
| Standard | DIN 933 |
| Material | Brass |
| Finish | Zinc Plated |
| Grade | N/A |
| Pipe Size | 4.6" |
| Outside Diameter | 4.169" |
| Wall Thickness | 0.358" |
A high-performance industrial component, this Brass Schedule 40 seamless pipe is precisely manufactured with a nominal pipe size of 4.6 inches, an actual outside diameter of 4.169 inches, and a substantial wall thickness of 0.358 inches. Constructed from high-grade brass, it exhibits excellent ductility, machinability, and exceptional resistance to a wide range of corrosive media, including water, steam, and certain chemicals. This combination of dimensional accuracy and material integrity makes it ideal for critical fluid handling systems where longevity and performance are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure pipe ends are clean and free of debris. 2. Apply appropriate pipe sealant or PTFE tape to threads if applicable. 3. Carefully thread the pipe into the fitting, ensuring a snug fit without overtightening. 4. Verify joint integrity after installation.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incompatible pipe sealant or thread tape. | Always use sealants and tapes specifically rated for brass and the conveyed media. |
| Overtightening pipe connections, leading to stress fractures. | Tighten connections firmly but avoid excessive force. Refer to fitting manufacturer torque specifications if available. |
A: This Seamless Pipe, Schedule 40 is manufactured from Brass.
A: Industrial fluid transfer systems, Water and steam piping, Chemical processing equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||