This industrial silicone O-ring, featuring a brass fitting, provides robust sealing for critical applications. Its precise dimensions ensure a tight fit, preventing leaks under pressure and temperature variations.
| Standard | ASME B18 |
| Material | Brass |
| Finish | Galvanized |
| Grade | N/A |
| Inside Diameter | 0.209" |
| Outside Diameter | 1.534" |
| Cross Section | 0.137" |
Manufactured under strict quality controls, this silicone O-ring boasts a 0.209-inch inside diameter, 1.534-inch outside diameter, and a 0.137-inch cross-section. The silicone material offers excellent flexibility, high-temperature resistance, and good compression set, making it ideal for sealing against a wide range of fluids and gases. The integrated brass component enhances structural integrity and provides a stable mounting point for secure installation in demanding environments where reliable, long-term sealing is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating grooves are clean and free of debris. 2. Carefully place the O-ring into the designated groove, ensuring no twisting or stretching. 3. Apply light lubricant compatible with silicone and the application fluid if necessary for easier assembly.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force during installation, leading to O-ring damage. | Handle the O-ring with care and use appropriate tools or a light lubricant to ease installation without stressing the material. |
| Incorrect O-ring size selection, resulting in poor sealing or extrusion. | Always verify the required O-ring dimensions (ID, OD, cross-section) against the groove dimensions before ordering and installation. |
A: This Industrial O-Ring, Silicone is manufactured from Brass.
A: Hydraulic and Pneumatic Systems, Chemical Processing Equipment, Automotive and Aerospace Components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||