This industrial-grade silicone O-ring, constructed with a brass component, offers superior sealing performance in demanding environments. Its precise dimensions ensure effective containment and protection against leaks.
| Standard | ASME B18 |
| Material | Brass |
| Finish | Black Oxide |
| Grade | N/A |
| Inside Diameter | 4.533" |
| Outside Diameter | 2.192" |
| Cross Section | 0.239" |
Precision-manufactured to tight tolerances, this silicone O-ring features an Inside Diameter of 4.533 inches, an Outside Diameter of 2.192 inches, and a Cross Section of 0.239 inches. The brass material provides excellent corrosion resistance and conductivity, while the silicone elastomer offers a broad operating temperature range and flexibility. This combination makes it ideal for applications requiring a robust seal against aggressive media and extreme temperatures, ensuring system integrity and longevity in critical industrial processes.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sealing groove is clean, dry, and free of debris. 2. Carefully position the O-ring within the groove, avoiding any stretching or twisting. 3. Apply a light coating of compatible lubricant if necessary for easier assembly, ensuring it does not compromise the seal.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overstretching the O-ring during installation, leading to premature failure. | Install the O-ring without excessive tension. If resistance is met, re-evaluate the groove dimensions or lubricant choice. |
| Installing the O-ring into a dirty or damaged groove, compromising the seal's integrity. | Thoroughly inspect and clean the sealing groove before installation. Repair or replace damaged grooves immediately. |
A: This Industrial O-Ring, Silicone is manufactured from Brass.
A: Hydraulic and Pneumatic Systems, Chemical Processing Equipment, High-Temperature Fluid Handling.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||