This industrial O-ring, constructed from high-performance Silicone with a Brass component, offers exceptional sealing capabilities. Its precise dimensions ensure a secure fit and leak-proof performance in critical applications.
| Standard | DIN 933 |
| Material | Brass |
| Finish | Anodized |
| Grade | N/A |
| Inside Diameter | 9.854" |
| Outside Diameter | 9.410" |
| Cross Section | 0.090" |
Precision-manufactured to tight tolerances, this Silicone O-ring with a Brass element features an Inside Diameter of 9.854 inches and an Outside Diameter of 9.410 inches, with a cross-section of 0.090 inches. The Silicone material provides excellent flexibility, temperature resistance (typically -60°C to +230°C), and chemical inertness, while the Brass component offers enhanced strength and rigidity. This combination is ideal for sealing against a variety of fluids and gases in high-pressure, high-temperature, or corrosive industrial environments where robust sealing is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating surfaces are clean and free of debris. 2. Carefully place the O-ring into its designated groove, avoiding stretching or twisting. 3. Assemble the components, ensuring even pressure distribution around the O-ring.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening fasteners, leading to O-ring extrusion or damage. | Use a torque wrench to tighten fasteners to the manufacturer's recommended specifications. |
| Using the wrong O-ring material for the fluid or temperature environment. | Consult compatibility charts and select an O-ring material (Silicone in this case) suitable for the specific operating conditions. |
A: This Industrial O-Ring, Silicone is manufactured from Brass.
A: Hydraulic and pneumatic systems, Chemical processing equipment, Automotive and aerospace seals.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||