This industrial brass O-ring is engineered for uncompromising sealing performance in aggressive environments. Its robust construction ensures reliability and longevity under extreme pressure and temperature conditions.
| Standard | ASME B18 |
| Material | Brass |
| Finish | Zinc Plated |
| Grade | N/A |
| Inside Diameter | 8.444" |
| Outside Diameter | 9.923" |
| Cross Section | 0.194" |
Purpose-built for heavy-duty applications, this brass O-ring features precise dimensions: an 8.444-inch inside diameter, a 9.923-inch outside diameter, and a 0.194-inch cross-section. The brass material provides excellent corrosion resistance, high tensile strength, and good thermal conductivity, making it ideal for sealing applications involving aggressive media, high temperatures, and significant pressure differentials. Its inherent rigidity and durability ensure a secure and long-lasting seal, preventing leaks in critical industrial systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean both the groove and the O-ring thoroughly to remove any debris. 2. Carefully insert the O-ring into its designated groove, ensuring it is not twisted. 3. Apply a thin layer of compatible lubricant if recommended for the specific application to facilitate assembly and prevent damage.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using the wrong size O-ring for the groove. | Always verify O-ring dimensions against the groove specifications to ensure a proper fit and seal. |
| Twisting or stretching the O-ring during installation. | Install the O-ring carefully into the groove without excessive force or rotation to prevent deformation and premature failure. |
A: This Industrial O-Ring, Silicone is manufactured from Brass.
A: Hydraulic and pneumatic systems, High-pressure fluid handling, Chemical processing equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||