Engineered for demanding industrial environments, this Brass O-Ring provides exceptional sealing integrity. Its precise dimensions ensure reliable performance in critical applications requiring chemical resistance and durability.
| Standard | DIN 933 |
| Material | Brass |
| Finish | Black Oxide |
| Grade | N/A |
| Inside Diameter | 1.208" |
| Outside Diameter | 2.592" |
| Cross Section | 0.218" |
Trusted by engineers across multiple sectors, this industrial O-ring is meticulously crafted from high-grade brass, offering superior corrosion resistance and excellent mechanical strength. With an Inside Diameter of 1.208 inches, an Outside Diameter of 2.592 inches, and a Cross Section of 0.218 inches, it is designed for robust sealing in applications involving moderate temperatures and pressures where brass's inherent properties are advantageous.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure sealing surfaces are clean and free of debris. 2. Carefully place the O-ring into the designated groove, ensuring it is seated evenly. 3. Assemble mating components, applying uniform pressure to compress the O-ring to its functional seal.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using the wrong O-ring size for the groove. | Always verify O-ring dimensions (ID, OD, CS) against the groove specifications before installation. |
| Installing the O-ring with excessive force or pinching. | Handle the O-ring with care, avoiding stretching or twisting, and ensure it is properly seated before mating components are joined. |
A: This Industrial O-Ring, Silicone is manufactured from Brass.
A: Hydraulic systems, Pneumatic fittings, Chemical processing equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||