This industrial-grade O-ring features a robust brass base for superior structural integrity and a high-performance silicone sealing element. Engineered for reliable sealing in challenging conditions, it offers excellent resistance to various chemicals and extreme temperature fluctuations.
| Standard | ASME B18 |
| Material | Brass |
| Finish | Zinc Plated |
| Grade | N/A |
| Inside Diameter | 2.234" |
| Outside Diameter | 4.775" |
| Cross Section | 0.130" |
Designed for demanding industrial environments, this O-ring boasts an inside diameter of 2.234 inches, an outside diameter of 4.775 inches, and a cross-section of 0.130 inches. The premium silicone material provides exceptional elasticity and resilience, ensuring a tight seal against a wide range of fluids and gases. Its inherent thermal stability makes it suitable for applications operating from -60°C to +230°C, while the brass substrate offers excellent corrosion resistance and mechanical strength for pressurized systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean the groove and mating surfaces thoroughly to remove any debris or contaminants. 2. Lightly lubricate the O-ring and groove with a compatible lubricant to prevent tearing during installation. 3. Carefully install the O-ring into the designated groove, ensuring it is seated properly and without twists.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force during installation, leading to O-ring damage. | Apply lubricant and gentle, even pressure to seat the O-ring. |
| Incorrect O-ring size for the groove, causing leakage or extrusion. | Verify O-ring dimensions against groove specifications before installation. |
A: This Industrial O-Ring, Silicone is manufactured from Brass.
A: Chemical processing equipment, High-temperature fluid handling systems, Automotive and aerospace seals.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||