This premium brass stock sheet is engineered for superior lubricity. Its specific alloy composition and precise dimensions ensure reliable performance in demanding applications where reduced friction is critical.
| Standard | ASTM A106 |
| Material | Brass |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.102" |
| Length | 15" |
| Width | 27" |
Trusted by engineers across multiple sectors, this brass stock sheet offers exceptional wear resistance and inherent self-lubricating properties. With a nominal thickness of 0.102 inches, a length of 15 inches, and a width of 27 inches, it is ideal for fabricating custom bearing surfaces, wear plates, and low-friction guides. The brass alloy provides excellent machinability and corrosion resistance, making it suitable for use in environments where exposure to moisture or mild chemicals is a concern.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the substrate surface is clean, dry, and free from debris. 2. Accurately cut the brass stock sheet to the required dimensions using appropriate metalworking tools. 3. Securely fasten the fabricated component to the intended application using fasteners or adhesives suitable for the operating environment.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard brass for high-wear applications. | Select a brass alloy specifically designated for lubricating or bearing applications to ensure adequate wear resistance and reduced friction. |
| Inadequate surface preparation before installation. | Thoroughly clean and degrease both the brass sheet and the mating surface to ensure proper contact and optimal lubrication. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Low-friction bearing surfaces, Wear plates and guides, Bushings and sleeves.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||