This high-performance brass stock sheet is engineered for superior lubrication and wear resistance. Its specific alloy composition minimizes friction and extends the lifespan of mating components.
| Standard | ISO 9001 |
| Material | Brass |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.117" |
| Length | 32" |
| Width | 38" |
Specified by design engineers worldwide, this brass stock sheet (0.117" thickness, 32" length, 38" width) offers exceptional machinability and inherent self-lubricating properties. The alloy's low coefficient of friction makes it ideal for sliding surfaces, bearings, bushings, and wear plates where reduced maintenance and extended operational life are critical. Its excellent corrosion resistance further enhances its suitability for demanding industrial environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating surfaces are clean and free of contaminants. 2. Cut the brass sheet to the required dimensions using appropriate tooling. 3. Securely fasten the brass sheet to the designated component, ensuring proper alignment.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using inadequate cutting tools, leading to burrs and dimensional inaccuracies. | Utilize sharp, high-quality cutting tools specifically designed for brass to achieve clean cuts and precise dimensions. |
| Overheating the brass during machining, which can alter its material properties and lubrication characteristics. | Employ appropriate cooling methods and moderate cutting speeds to prevent excessive heat buildup during fabrication. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Self-lubricating bearings, Wear plates in sliding mechanisms, Bushings for low-friction pivots.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||