This brass stock sheet is specifically engineered for lubricating applications. Its inherent self-lubricating properties and durability make it a superior choice for critical wear surfaces and bearing components.
| Standard | DIN 933 |
| Material | Brass |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.570" |
| Length | 19" |
| Width | 33" |
Precision-manufactured to tight tolerances, this brass stock sheet (0.570" thickness, 19" width, 33" length) offers exceptional wear resistance and controlled friction characteristics. Composed of a high-copper alloy with additives for enhanced lubricity, it minimizes wear in sliding contact applications and operates effectively under moderate load and speed conditions. The material's thermal conductivity also aids in heat dissipation, further enhancing its performance in demanding environments. Ideal for fabricating custom bushings, thrust washers, and wear pads where reduced maintenance and extended service life are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean surfaces thoroughly to ensure optimal contact. 2. Machine to desired final dimensions using appropriate tooling for brass. 3. Securely install the component, ensuring proper alignment within the mating assembly.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard machining practices without considering brass's ductility. | Employ sharp cutting tools and adjust feed rates to prevent galling and ensure a smooth finish. |
| Insufficient lubrication of mating surfaces. | While the brass itself offers lubrication, supplementing with appropriate grease or oil for extreme conditions will maximize lifespan. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Custom bushings and bearings, Thrust washers and wear plates, Low-friction sliding components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||