This premium brass stock sheet is engineered for superior lubrication and wear resistance in demanding industrial environments. Its robust thickness and dimensional stability ensure reliable performance under heavy loads.
| Standard | ASTM A106 |
| Material | Brass |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.343" |
| Length | 30" |
| Width | 29" |
Purpose-built for heavy-duty applications, this brass stock sheet features a substantial 0.343" (8.71mm) thickness, ensuring exceptional structural integrity and longevity. The alloy composition provides inherent self-lubricating properties, minimizing friction and wear in critical moving components. With dimensions of 30" (762mm) in length and 29" (736.6mm) in width, it offers ample material for custom fabrication of bearings, bushings, thrust washers, and wear plates in high-stress machinery and equipment. Its excellent machinability allows for precise fitting and integration into complex systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean all mating surfaces thoroughly to remove any debris or contaminants. 2. Carefully measure and cut the brass stock to the required dimensions for the specific component. 3. Securely fasten the fabricated brass component using appropriate industrial-grade fasteners, ensuring proper alignment and load distribution.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper surface preparation leading to premature wear. | Always ensure all mating surfaces are meticulously cleaned and free of any particulate matter before installation. |
| Over-tightening fasteners, causing stress concentrations. | Utilize calibrated torque wrenches to ensure fasteners are tightened to manufacturer specifications, preventing material deformation. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Heavy-duty bearings and bushings, Thrust washers and wear plates, Slides and guides in industrial machinery.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||