This premium brass stock sheet is engineered for demanding lubricating applications. Its inherent self-lubricating properties and excellent machinability make it a superior choice for custom components requiring reduced friction and enhanced durability.
| Standard | ASME B18 |
| Material | Brass |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.297" |
| Length | 41" |
| Width | 14" |
Trusted by engineers across multiple sectors, this brass stock sheet offers a robust solution for wear-resistant and low-friction components. Measuring 0.297 inches in thickness, 41 inches in length, and 14 inches in width, it is fabricated from high-grade brass, known for its excellent machinability, corrosion resistance, and natural lubricating qualities. This combination of properties makes it ideal for manufacturing bearings, bushings, guides, and other moving parts where minimizing wear and heat generation is critical. The sheet's dimensional stability ensures precise component fabrication for demanding industrial environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean the mating surfaces thoroughly to remove any debris or contaminants. 2. Cut the brass sheet to the required dimensions using appropriate cutting tools for brass. 3. Securely fasten the cut brass component to the intended application, ensuring proper alignment and load distribution.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not suitable for brass, leading to rough edges and material deformation. | Employ sharp, high-quality cutting tools specifically designed for machining brass to ensure clean cuts and maintain material integrity. |
| Insufficient surface preparation before installation, resulting in premature wear and friction. | Thoroughly clean and degrease both the brass component and its mating surface to guarantee optimal performance and longevity. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Custom Bearings and Bushings, Low-Friction Guide Rails, Wear Plates in Machinery.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||