Engineered for superior performance in high-friction scenarios, this brass stock sheet offers excellent self-lubricating properties. Its robust composition minimizes wear and extends equipment lifespan.
| Standard | DIN 933 |
| Material | Brass |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.262" |
| Length | 21" |
| Width | 47" |
Designed for demanding industrial environments, this brass stock sheet boasts a precise thickness of 0.262 inches, a generous length of 21 inches, and a width of 47 inches. Composed of a specialized brass alloy, it exhibits excellent machinability and inherent lubricity, reducing friction and heat buildup in sliding components. Its material properties make it ideal for bushings, bearings, wear plates, and other applications where consistent lubrication is critical for operational efficiency and longevity.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating surface is clean and free of debris. 2. Precisely cut the brass stock sheet to the required dimensions using appropriate tooling. 3. Securely fasten the cut sheet to the designated component, ensuring proper alignment and contact.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper cutting leading to burrs or uneven edges. | Utilize sharp, high-quality cutting tools specifically designed for brass. Deburr edges thoroughly after cutting. |
| Insufficient surface preparation of the mating component. | Thoroughly clean and degrease both the brass sheet and the mating surface to ensure optimal contact and lubrication. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Self-lubricating bushings, Wear plates in conveyor systems, Journal bearings and thrust washers.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||