This brass stock sheet is engineered for superior lubrication and wear resistance. Its specific alloy composition makes it ideal for applications demanding reduced friction and extended component life.
| Standard | ASME B18 |
| Material | Brass |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.091" |
| Length | 23" |
| Width | 22" |
Manufactured under strict quality controls, this brass stock sheet adheres to precise dimensional tolerances. With a thickness of 0.091 inches, a length of 23 inches, and a width of 22 inches, it provides ample material for custom fabrication. The brass alloy is selected for its inherent self-lubricating properties, excellent machinability, and good corrosion resistance, making it suitable for demanding industrial environments and critical moving parts. Its homogenous structure ensures consistent performance across the entire sheet.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Measure and mark the desired dimensions on the brass stock sheet. 2. Utilize appropriate cutting tools (e.g., abrasive cutoff wheel, bandsaw) for precise material removal. 3. Smooth all cut edges using deburring tools or files to ensure a clean finish.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overheating during machining, which can alter the brass's lubricating properties. | Use appropriate cutting fluids and maintain moderate cutting speeds to prevent excessive heat buildup. |
| Inconsistent application of lubrication when used as a bearing surface. | Ensure uniform contact and consider integrating it into a system designed for continuous or intermittent lubrication. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Bearing surfaces and bushings, Wear plates and sliding components, Low-friction assemblies.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||