This brass stock sheet is engineered for superior lubricating performance in high-friction environments. Its inherent properties make it a robust choice for demanding industrial applications.
| Standard | ASME B18 |
| Material | Brass |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.951" |
| Length | 19" |
| Width | 32" |
Purpose-built for heavy-duty applications, this brass stock sheet offers exceptional wear resistance and self-lubricating characteristics due to its precise alloy composition. Measuring 0.951 inches in thickness, 19 inches in width, and 32 inches in length, it is ideal for fabricating components that require low friction and extended service life. The material's thermal conductivity also aids in heat dissipation, crucial for preventing component seizure under continuous operation. This sheet is specifically designed to reduce maintenance cycles and enhance operational efficiency in machinery.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean the mating surfaces thoroughly to remove any contaminants. 2. Precisely cut the brass stock sheet to the required dimensions for the component. 3. Securely fasten the fabricated component to the designated machinery part, ensuring proper alignment.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using abrasive cleaning agents that can scratch the lubricating surface. | Employ non-abrasive cleaners and soft cloths for surface preparation. |
| Inadequate cutting precision leading to misalignment and premature wear. | Utilize precision cutting tools and verify measurements before installation. |
A: This Brass Stock Sheet is manufactured from Brass.
A: Bearing surfaces in heavy machinery, Slide plates and guides in industrial equipment, Wear pads for conveyor systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||