Engineered for superior sealing, this industrial silicone O-ring features a brass construction for enhanced durability and chemical resistance. Precisely manufactured for critical applications.
| Standard | ASTM A106 |
| Material | Brass |
| Finish | Plain |
| Grade | N/A |
| Inside Diameter | 4.403" |
| Outside Diameter | 2.724" |
| Cross Section | 0.264" |
Built to exacting engineering tolerances, this silicone O-ring boasts an inside diameter of 4.403 inches, an outside diameter of 2.724 inches, and a robust 0.264-inch cross-section. The brass material provides excellent resistance to corrosion and a wide range of chemicals, making it ideal for high-pressure and high-temperature environments where reliable sealing is paramount. Its silicone composition ensures flexibility and longevity under demanding operational conditions.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure sealing surfaces are clean and free from debris or damage. 2. Carefully lubricate the O-ring and the sealing groove with a compatible lubricant. 3. Gently install the O-ring into the groove, ensuring it is seated evenly without twisting or stretching.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force during installation, leading to O-ring damage. | Apply moderate, even pressure. If resistance is met, re-check lubrication and surface preparation. |
| Selecting an O-ring incompatible with the fluid or operating temperature. | Verify material compatibility and operating temperature range against application requirements. |
A: This Industrial O-Ring, Silicone is manufactured from Brass.
A: High-pressure hydraulic systems, Chemical processing equipment, Automotive and aerospace sealing.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||