This industrial-grade O-ring features a robust silicone elastomer for exceptional temperature resistance and flexibility, integrated with a brass fitting for secure, corrosion-resistant sealing in demanding environments.
| Standard | ASME B18 |
| Material | Brass |
| Finish | Plain |
| Grade | N/A |
| Inside Diameter | 3.884" |
| Outside Diameter | 5.654" |
| Cross Section | 0.176" |
Precision-manufactured to tight tolerances, this silicone O-ring boasts an inside diameter of 3.884 inches, an outside diameter of 5.654 inches, and a cross-section of 0.176 inches. The silicone material provides excellent resistance to a wide temperature range (-50°C to +230°C), UV radiation, and ozone, making it suitable for static and dynamic sealing applications. The integrated brass fitting ensures superior chemical compatibility and mechanical integrity within the sealing assembly, preventing leaks in critical fluid and gas systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating surfaces are clean and free of debris. 2. Carefully install the O-ring into its designated groove, avoiding any twisting or stretching. 3. Apply a compatible lubricant if recommended for the specific application to facilitate installation and ensure proper sealing.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening fasteners, crushing the O-ring. | Tighten fasteners to the recommended torque specification, ensuring even pressure distribution. |
| Using incompatible lubricants or cleaning agents that degrade silicone. | Consult the material compatibility chart and use only approved lubricants and cleaning solutions. |
A: This Industrial O-Ring, Silicone is manufactured from Brass.
A: High-temperature hydraulic systems, Food processing equipment, Medical device sealing.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||