This high-grade silicone O-ring, housed within a brass fitting, offers exceptional sealing capabilities in harsh industrial settings. It ensures reliable performance and longevity.
| Standard | ASTM A106 |
| Material | Brass |
| Finish | Black Oxide |
| Grade | N/A |
| Inside Diameter | 5.944" |
| Outside Diameter | 1.253" |
| Cross Section | 0.193" |
Designed for demanding industrial environments, this O-ring features a precise 5.944-inch inside diameter, a 1.253-inch outside diameter, and a 0.193-inch cross-section. The silicone material provides excellent resistance to extreme temperatures, chemicals, and ozone, ensuring a robust seal. The brass housing offers superior corrosion resistance and mechanical strength, making it ideal for applications involving high pressure or aggressive media. This combination ensures long-term sealing integrity in critical systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sealing groove and mating surfaces are clean and free of debris. 2. Carefully compress the O-ring to fit into the groove, avoiding stretching or twisting. 3. Verify proper seating and compression before assembling the mating component.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-stretching the O-ring during installation. | Gently flex and compress the O-ring into the groove, using a lubricant if necessary, to prevent permanent deformation. |
| Installing with a dirty sealing groove. | Thoroughly clean the groove and mating surfaces with an appropriate solvent to remove any contaminants that could compromise the seal. |
A: This Industrial O-Ring, Silicone is manufactured from Brass.
A: Chemical processing equipment, High-temperature fluid systems, Automotive engine components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||