Engineered for superior sealing in challenging environments, this Silicone O-Ring features a robust Brass insert for enhanced structural integrity and conductivity. Delivers reliable performance across a broad temperature range.
| Standard | ISO 9001 |
| Material | Brass |
| Finish | Black Oxide |
| Grade | N/A |
| Inside Diameter | 2.997" |
| Outside Diameter | 2.189" |
| Cross Section | 0.122" |
Specified by design engineers worldwide, this industrial O-ring is constructed with a premium grade of silicone rubber, offering exceptional flexibility, resistance to extreme temperatures (-55°C to +230°C), and excellent dielectric properties. The integrated Brass component provides superior dimensional stability and contributes to effective grounding or heat dissipation where required. Precisely manufactured to a 2.997" inside diameter, 2.189" outside diameter, and a 0.122" cross-section, ensuring a tight, leak-proof seal in critical fluid and gas systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the groove or mating surfaces are clean and free of debris. 2. Lightly lubricate the O-ring with a compatible silicone-based lubricant. 3. Carefully install the O-ring into the designated groove, ensuring it is not twisted.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect lubricant incompatible with silicone. | Always use a silicone-based lubricant or a lubricant specifically rated for silicone elastomers to prevent material degradation. |
| Overstretching or twisting the O-ring during installation. | Install the O-ring without excessive stretching or twisting to maintain its sealing integrity and prevent premature failure. |
A: This Industrial O-Ring, Silicone is manufactured from Brass.
A: High-temperature industrial machinery, Aerospace and automotive fluid systems, Electrical enclosures requiring grounding.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||