Engineered for superior sealing in harsh industrial settings, this brass O-ring offers exceptional chemical resistance and thermal stability. Its precise dimensions ensure a reliable, leak-free seal in critical applications.
| Standard | ASTM A106 |
| Material | Brass |
| Finish | Zinc Plated |
| Grade | N/A |
| Inside Diameter | 1.918" |
| Outside Diameter | 10.545" |
| Cross Section | 0.111" |
Designed for demanding industrial environments, this O-ring is constructed from high-grade brass, providing excellent resistance to a wide range of chemicals, solvents, and elevated temperatures. With an inside diameter of 1.918 inches, an outside diameter of 10.545 inches, and a cross-section of 0.111 inches, it is specifically engineered to maintain seal integrity under significant pressure and extreme operating conditions. Its metallic composition makes it ideal for applications where traditional elastomers may degrade or fail.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Inspect the sealing groove and mating surfaces for any debris, burrs, or damage. 2. Lightly lubricate the O-ring with a compatible lubricant to ease installation and prevent damage. 3. Carefully place the O-ring into the groove, ensuring it sits flush and is not twisted.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening the fitting, which can crush the O-ring. | Tighten fittings to the manufacturer's recommended torque specifications. |
| Using incompatible lubricants or cleaning agents, leading to material degradation. | Always consult chemical compatibility charts for lubricants and cleaning agents. |
A: This Industrial O-Ring, Silicone is manufactured from Brass.
A: Chemical Processing Equipment, High-Temperature Fluid Systems, Hydraulic and Pneumatic Actuators.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||