This precision-engineered industrial O-ring, crafted from durable brass, offers exceptional sealing capabilities. Designed for reliability, it meets stringent performance requirements in diverse applications.
| Standard | ASTM A106 |
| Material | Brass |
| Finish | Passivated |
| Grade | N/A |
| Inside Diameter | 0.100" |
| Outside Diameter | 6.902" |
| Cross Section | 0.133" |
Manufactured under strict quality controls, this silicone O-ring exhibits precise dimensional accuracy with an Inside Diameter of 0.100 inches, an Outside Diameter of 6.902 inches, and a Cross Section of 0.133 inches. The brass material provides excellent corrosion resistance and mechanical strength, making it ideal for applications involving aggressive media or elevated temperatures. Its robust construction ensures a reliable seal against leakage, preventing contamination and maintaining system integrity in demanding industrial settings.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean mating surfaces thoroughly to remove any debris or lubricant. 2. Gently stretch the O-ring over the shaft or into the groove, ensuring it lies flat without twisting. 3. Press the O-ring into the groove or assemble mating component, verifying proper seating.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force during installation, leading to O-ring damage or deformation. | Apply gentle, even pressure and utilize appropriate installation tools if necessary to avoid pinching or stretching the O-ring. |
| Incorrect O-ring size selection, resulting in leakage or premature failure. | Always verify the required O-ring dimensions (ID, OD, CS) against the groove or mating component specifications before installation. |
A: This Industrial O-Ring, Silicone is manufactured from Brass.
A: Hydraulic systems, Pneumatic equipment, Fluid power transmission.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||