This brass industrial O-ring provides robust sealing in harsh conditions. Its precise dimensions ensure a reliable barrier against leaks in critical fluid and gas systems.
| Standard | DIN 933 |
| Material | Brass |
| Finish | Zinc Plated |
| Grade | N/A |
| Inside Diameter | 6.311" |
| Outside Diameter | 6.595" |
| Cross Section | 0.193" |
Designed for demanding industrial environments, this O-ring features a solid brass construction, offering excellent resistance to corrosion and chemical degradation. With an inside diameter of 6.311 inches, an outside diameter of 6.595 inches, and a precise 0.193-inch cross-section, it provides a tight seal for applications involving moderate temperatures and pressures. The brass material ensures long-term performance and integrity, making it ideal for use in chemical processing, water treatment, and general industrial machinery where reliable static or dynamic sealing is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating grooves are clean, dry, and free from burrs or damage. 2. Lightly lubricate the O-ring and groove with a compatible lubricant to facilitate installation and prevent tearing. 3. Carefully place the O-ring into the groove, ensuring it sits evenly and without twisting.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using the wrong lubricant, which can degrade the O-ring material. | Always consult the O-ring manufacturer's recommendations for compatible lubricants. |
| Twisting or stretching the O-ring excessively during installation, leading to premature failure. | Install the O-ring gently and ensure it lies flat within the groove without undue stress. |
A: This Industrial O-Ring, Silicone is manufactured from Brass.
A: Chemical processing equipment, Water and wastewater treatment systems, General industrial machinery sealing.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||