This industrial O-ring, crafted from durable brass, ensures reliable sealing in challenging environments. Its precise dimensions provide a secure fit and effective barrier against leaks in critical systems.
| Standard | DIN 933 |
| Material | Brass |
| Finish | Zinc Plated |
| Grade | N/A |
| Inside Diameter | 6.125" |
| Outside Diameter | 0.232" |
| Cross Section | 0.173" |
Designed for demanding industrial environments, this brass O-ring offers exceptional corrosion resistance and durability. With an Inside Diameter of 6.125 inches, an Outside Diameter of 0.232 inches, and a Cross Section of 0.173 inches, it is engineered for precise fitting and long-term sealing performance in high-pressure and chemical-resistant applications. The inherent properties of brass make it suitable for environments where non-ferrous materials are specified for electrical conductivity or to prevent ferrous contamination.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating grooves are clean and free of debris. 2. Carefully stretch the O-ring over the component, avoiding excessive force that could lead to nicks or tears. 3. Seat the O-ring firmly within its designated groove to achieve a proper seal.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overstretching the O-ring during installation. | Gently flex and guide the O-ring into place, using appropriate tools if necessary to avoid excessive tension. |
| Installing on a dirty or damaged groove. | Thoroughly clean and inspect the groove for any imperfections before installing the O-ring. |
A: This Industrial O-Ring, Silicone is manufactured from Brass.
A: Fluid power systems, Chemical processing equipment, High-pressure hydraulic fittings.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||