This precision-engineered industrial O-ring, constructed from high-grade silicone, offers superior sealing in demanding environments. Its robust design ensures reliable performance in critical applications.
| Standard | ISO 9001 |
| Material | Brass |
| Finish | Plain |
| Grade | N/A |
| Inside Diameter | 5.013" |
| Outside Diameter | 4.395" |
| Cross Section | 0.268" |
Manufactured under strict quality controls, this industrial O-ring features a precise inside diameter of 5.013 inches, an outside diameter of 4.395 inches, and a 0.268-inch cross-section. The silicone material provides excellent flexibility, temperature resistance, and chemical inertness, making it suitable for a wide range of sealing duties. The brass material offers excellent corrosion resistance and good conductivity, ideal for specific industrial environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sealing groove is clean and free of debris. 2. Carefully position the O-ring within the groove, avoiding excessive stretching or twisting. 3. Apply a light lubricant compatible with silicone and the application fluid if necessary for easier assembly and to prevent damage.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening during installation, leading to compression set and premature failure. | Install the O-ring with just enough compression to create a seal; avoid excessive force. |
| Using incompatible lubricants that can degrade the silicone material. | Always verify lubricant compatibility with silicone and the operating medium before application. |
A: This Industrial O-Ring, Silicone is manufactured from Brass.
A: High-pressure fluid systems, Chemical processing equipment, Industrial machinery and controls.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||