This precision-engineered brass industrial O-ring provides exceptional sealing integrity in demanding applications. Its robust construction ensures reliable performance and longevity in various industrial settings.
| Standard | ISO 9001 |
| Material | Brass |
| Finish | Passivated |
| Grade | N/A |
| Inside Diameter | 3.943" |
| Outside Diameter | 10.360" |
| Cross Section | 0.213" |
Manufactured under strict quality controls, this industrial O-ring boasts a precise inside diameter of 3.943 inches, an outside diameter of 10.360 inches, and a cross-section of 0.213 inches. Constructed from high-grade brass, it offers excellent corrosion resistance and mechanical strength, making it suitable for environments where chemical inertness and durability are paramount. The material's inherent properties allow for effective sealing across a range of pressures and temperatures, ensuring a leak-free seal in critical industrial systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating grooves are clean, dry, and free from burrs or sharp edges. 2. Carefully install the O-ring into the designated groove, avoiding excessive stretching or twisting. 3. Apply a thin film of compatible lubricant if necessary, and assemble the mating components, ensuring even pressure distribution.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using a dry installation which can lead to O-ring damage. | Always use a compatible lubricant during installation to reduce friction and prevent tearing or nicking of the O-ring. |
| Overstretching or twisting the O-ring during installation. | Gently place the O-ring into the groove, allowing it to conform to the shape without unnecessary force. |
A: This Industrial O-Ring, Silicone is manufactured from Brass.
A: Hydraulic systems, Pneumatic assemblies, Fluid power equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||