This robust industrial O-ring, crafted from high-grade brass, offers exceptional durability and corrosion resistance for critical sealing applications. Engineered for precise fit and long-term performance.
| Standard | DIN 933 |
| Material | Brass |
| Finish | Zinc Plated |
| Grade | N/A |
| Inside Diameter | 3.537" |
| Outside Diameter | 3.339" |
| Cross Section | 0.165" |
A high-performance industrial component, this brass O-ring is designed for applications demanding superior chemical inertness and mechanical integrity. With an inside diameter of 3.537 inches, an outside diameter of 3.339 inches, and a precise 0.165-inch cross-section, it ensures a leak-proof seal under moderate pressures and temperatures. The inherent properties of brass make it ideal for environments exposed to certain corrosive media where standard elastomers may degrade. Its solid construction prevents extrusion under typical operating conditions, contributing to extended service life.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating surfaces are clean, dry, and free of debris. 2. Carefully position the O-ring within its groove, avoiding any stretching or twisting. 3. Apply light, even pressure to seat the O-ring, ensuring it is fully contained within the groove before assembly.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening fasteners, causing O-ring extrusion or deformation. | Adhere to specified torque values during assembly to prevent over-compression of the O-ring. |
| Using a lubricant incompatible with the brass material or surrounding environment. | Consult compatibility charts and use only approved lubricants specifically designed for brass and the intended service conditions. |
A: This Industrial O-Ring, Silicone is manufactured from Brass.
A: Hydraulic and pneumatic systems, Chemical processing equipment, Fluid handling assemblies.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||