Engineered for robust sealing in demanding environments, this Silicone O-Ring features a durable Brass core. Its precise dimensions ensure a reliable seal against leaks in critical industrial systems.
| Standard | ISO 9001 |
| Material | Brass |
| Finish | Black Oxide |
| Grade | N/A |
| Inside Diameter | 1.045" |
| Outside Diameter | 10.607" |
| Cross Section | 0.116" |
Trusted by engineers across multiple sectors, this industrial O-Ring is constructed with a premium Silicone elastomer for exceptional flexibility, temperature resistance, and chemical inertness. The integrated Brass core provides structural integrity and enhances sealing performance in high-pressure applications. With an Inside Diameter of 1.045 inches, an Outside Diameter of 10.607 inches, and a Cross Section of 0.116 inches, this O-ring is designed to meet stringent sealing requirements in diverse industrial settings.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sealing groove is clean and free of debris. 2. Carefully stretch the O-ring over the fitting, avoiding excessive force that could cause damage. 3. Position the O-ring squarely within the groove, ensuring it is not twisted or pinched.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using an O-ring of incorrect size for the groove. | Always verify the O-ring's dimensions (ID, OD, and cross-section) against the groove specifications before installation. |
| Twisting or pinching the O-ring during installation. | Install the O-ring gently, ensuring it sits evenly within the groove without undue stress or compression. |
A: This Industrial O-Ring, Silicone is manufactured from Brass.
A: Hydraulic systems, Pneumatic equipment, Chemical processing machinery.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||