This industrial-grade O-ring features a robust brass construction, offering exceptional corrosion resistance and durability. Designed for reliable static and dynamic sealing in challenging environments, ensuring leak-free operation.
| Standard | ASME B18 |
| Material | Brass |
| Finish | Black Oxide |
| Grade | N/A |
| Inside Diameter | 1.832" |
| Outside Diameter | 0.489" |
| Cross Section | 0.161" |
Engineered for reliability and performance, this brass industrial O-ring boasts a precise 1.832-inch inside diameter, a 0.489-inch outside diameter, and a 0.161-inch cross-section. The inherent properties of brass, including excellent corrosion resistance and moderate tensile strength, make it ideal for applications involving aggressive fluids or environments where non-sparking properties are advantageous. This O-ring is optimized for static seals in flange connections, valve seats, and housing assemblies where consistent sealing force and chemical inertness are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure sealing surfaces are clean, dry, and free from debris or damage. 2. Lightly lubricate the O-ring and groove with a compatible lubricant to prevent tearing and facilitate installation. 3. Carefully place the O-ring into the designated groove, ensuring it is seated evenly and without twisting.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force during installation, leading to O-ring damage. | Apply gentle, consistent pressure. If resistance is encountered, re-check lubrication and alignment. |
| Installing a dry O-ring, causing friction and potential tearing. | Always use a compatible lubricant specifically designed for O-rings and the application's media. |
| Incorrect O-ring size for the groove, resulting in poor sealing or extrusion. | Verify O-ring dimensions (ID, OD, CS) against groove specifications before installation. |
A: This Industrial O-Ring, Silicone is manufactured from Brass.
A: Hydraulic and Pneumatic Systems, Fluid Handling Equipment, Chemical Processing Equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||