This industrial O-ring, crafted from high-grade brass, provides exceptional sealing integrity. Its precise dimensions ensure a secure fit in critical fluid and gas systems, offering superior performance and longevity.
| Standard | ASTM A106 |
| Material | Brass |
| Finish | Zinc Plated |
| Grade | N/A |
| Inside Diameter | 1.261" |
| Outside Diameter | 4.663" |
| Cross Section | 0.078" |
Engineered for reliability and performance, this brass industrial O-ring features an inside diameter of 1.261 inches, an outside diameter of 4.663 inches, and a precise cross-section of 0.078 inches. The brass material offers excellent corrosion resistance and good conductivity, making it suitable for environments where these properties are crucial. This O-ring is designed to withstand moderate pressures and temperatures, providing a robust seal in static and dynamic applications. Its dimensional accuracy ensures consistent performance and minimizes leakage risks in sensitive equipment.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating grooves are clean and free of debris. 2. Carefully install the O-ring, avoiding stretching or twisting. 3. Apply a thin layer of compatible lubricant if necessary to facilitate installation and improve sealing.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-stretching the O-ring during installation. | Gently ease the O-ring into the groove, using a plastic or wooden tool if needed, to prevent permanent deformation. |
| Using incompatible lubricants or cleaning agents. | Consult the O-ring manufacturer's compatibility chart and use only recommended lubricants and cleaning solvents. |
A: This Industrial O-Ring, Silicone is manufactured from Brass.
A: Hydraulic and pneumatic systems, Fluid handling equipment, Electrical connectors and grounding.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||