This high-performance industrial O-ring offers superior sealing capabilities. Constructed from durable brass for robust performance, it's ideal for applications requiring reliable containment and protection.
| Standard | DIN 933 |
| Material | Brass |
| Finish | Anodized |
| Grade | N/A |
| Inside Diameter | 7.733" |
| Outside Diameter | 6.652" |
| Cross Section | 0.145" |
Designed for demanding industrial environments, this O-ring features a nominal inside diameter of 7.733 inches and an outside diameter of 6.652 inches, with a precise 0.145-inch cross-section. The brass material provides excellent corrosion resistance and mechanical strength, making it suitable for moderate pressure and temperature applications where chemical compatibility with silicone is a requirement. Its robust construction ensures a secure seal against leaks in fluid and gas systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sealing groove is clean and free of debris. 2. Carefully inspect the O-ring for any damage or imperfections before installation. 3. Gently install the O-ring into the groove, avoiding stretching or twisting.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using a damaged O-ring. | Always inspect the O-ring for nicks, cuts, or abrasions before installation. Replace if any damage is found. |
| Overstretching or twisting the O-ring during installation. | Install the O-ring using minimal force, ensuring it sits squarely in the groove without distortion. |
A: This Industrial O-Ring, Silicone is manufactured from Brass.
A: Hydraulic systems, Pneumatic equipment, Chemical processing machinery.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||