This M5x100mm Brass Hex Cap Screw offers superior corrosion resistance and non-magnetic properties. Engineered for demanding environments, it ensures reliable and long-lasting fastening in a variety of critical applications.
| Standard | DIN 933 |
| Material | Brass |
| Finish | Anodized |
| Grade | N/A |
| Size | M5 |
| Length | 100mm |
| Head Width | 9mm |
Purpose-built for heavy-duty applications, this M5x100mm Brass Hex Cap Screw features a nominal diameter of M5 and a substantial 100mm length for deep engagement. The 9mm hexagonal head provides ample surface area for torque application with standard tooling. Manufactured from high-grade brass, it exhibits excellent corrosion resistance, particularly in marine, chemical, and humid environments. Its non-magnetic nature makes it suitable for sensitive electrical and electronic assemblies, preventing interference. The inherent ductility of brass also allows for slight deformation under load without catastrophic failure, contributing to its robustness in vibration-prone settings. Typical applications include plumbing fixtures, electrical connectors, marine hardware, and decorative components where both strength and aesthetic appeal are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Select the appropriate wrench or socket size for the 9mm hex head. 2. Thread the screw into the pre-tapped hole or through the components to be joined, ensuring it engages fully. 3. Apply steady torque until the desired clamping force is achieved, avoiding over-tightening to prevent stripping or material damage.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 898-1 / ISO 4014 |
| DIN Equivalent | DIN 931 / DIN 933 |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Bolt Size | Dry Torque (ft-lbs) | Lubricated Torque (ft-lbs) |
|---|---|---|
| M5 | Check Calculator | Reduce by 25% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| M5 | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force, leading to stripped threads or fastener breakage. | Apply gradual, consistent torque. If resistance is met, check for thread obstructions or misalignment. Consult torque specifications if available. |
| Using the wrong size wrench or socket, damaging the hex head. | Always use a properly sized wrench or socket to ensure a secure fit on the 9mm hex head for optimal torque transfer. |
A: This Hex Head Cap Screw, Brass is manufactured from Brass.
A: Marine Hardware, Electrical Connectors, Plumbing Fixtures.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||