This brass deep groove ball bearing offers superior corrosion resistance and excellent thermal conductivity, making it ideal for demanding power transmission applications where reliability and longevity are paramount.
| Standard | DIN 933 |
| Material | Brass |
| Finish | Galvanized |
| Grade | N/A |
| Inside Diameter | 99mm |
| Outside Diameter | 35mm |
| Width | 18mm |
Precision-manufactured to tight tolerances, this deep groove ball bearing features an inside diameter of 99mm, an outside diameter of 35mm, and a width of 18mm. Constructed from high-quality brass, it exhibits excellent resistance to corrosive environments and provides efficient heat dissipation, crucial for high-speed or high-temperature operations. The bearing's design ensures low friction and high load-carrying capacity, suitable for continuous operation in various industrial power transmission systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the bearing seat and shaft are clean and free from debris. 2. Carefully press the bearing onto the shaft or into the housing, applying even pressure to the correct ring (inner for shaft, outer for housing). 3. Verify smooth rotation and no binding after installation.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying force to the wrong ring during press-fitting. | Always apply installation force to the stationary ring (outer ring for housing installation, inner ring for shaft installation) to avoid deforming the raceways. |
| Contamination during installation. | Handle bearings in a clean environment and avoid exposure to dust, dirt, or moisture. Cleanliness is critical for bearing performance and lifespan. |
A: This Deep Groove Ball Bearing is manufactured from Brass.
A: Industrial Gearboxes, Electric Motors, Conveyor Systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||