This brass deep groove ball bearing offers superior corrosion resistance and excellent load-bearing capabilities. Engineered for reliable performance in demanding power transmission applications, ensuring smooth operation and extended service life.
| Standard | ASME B18 |
| Material | Brass |
| Finish | Plain |
| Grade | N/A |
| Inside Diameter | 97mm |
| Outside Diameter | 29mm |
| Width | 21mm |
Trusted by engineers across multiple sectors, this brass deep groove ball bearing (97mm Inside Diameter, 29mm Outside Diameter, 21mm Width) is constructed from high-grade brass for exceptional corrosion resistance and non-sparking properties, making it ideal for environments where electrical conductivity is a concern. Its robust design ensures efficient radial and axial load handling, minimizing friction and wear. This bearing is precisely manufactured to tight tolerances, guaranteeing smooth rotational performance and longevity in critical power transmission systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean the bearing housing and shaft thoroughly to remove any debris or contaminants. 2. Apply a thin, even layer of appropriate lubricant to the bearing raceways and shaft. 3. Carefully press the bearing onto the shaft or into the housing using a suitable press or vice, ensuring it is seated squarely and without tilting.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying excessive force during installation, leading to brinelling of the raceways. | Use a proper bearing press or induction heater for controlled installation. Ensure the force is applied evenly to the correct ring (outer ring for housing fit, inner ring for shaft fit). |
| Improper lubrication, either insufficient or using the wrong type of lubricant. | Refer to the manufacturer's specifications for the correct lubricant type and quantity. Ensure the lubricant is clean and free from contaminants before application. |
A: This Deep Groove Ball Bearing is manufactured from Brass.
A: Electric Motors, Gearboxes, Conveyor Systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||