This brass deep groove ball bearing provides exceptional performance in power transmission systems. Its robust construction ensures reliable operation under demanding conditions, offering durability and corrosion resistance.
| Standard | DIN 933 |
| Material | Brass |
| Finish | Galvanized |
| Grade | N/A |
| Inside Diameter | 95mm |
| Outside Diameter | 117mm |
| Width | 33mm |
Specified by design engineers worldwide, this brass deep groove ball bearing boasts an inside diameter of 95mm, an outside diameter of 117mm, and a width of 33mm. Constructed from high-grade brass, it offers superior corrosion resistance, excellent thermal conductivity, and non-sparking properties, making it ideal for environments where standard steel bearings may fail. Its deep groove raceway design efficiently handles both radial and axial loads, ensuring smooth, low-friction operation critical for continuous power transmission applications.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the housing bore and shaft are clean and within specified tolerances. 2. Carefully press the bearing onto the shaft or into the housing using a bearing press or appropriate tooling, applying even pressure. 3. Verify the bearing rotates freely and without resistance after installation.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying excessive force during press-fitting, potentially deforming the bearing rings. | Utilize a controlled bearing press and ensure force is applied only to the ring being fitted (shaft or housing). |
| Contaminating the bearing with dirt or debris during handling and installation. | Maintain a clean work environment and keep the bearing in its original packaging until ready for installation. |
A: This Deep Groove Ball Bearing is manufactured from Brass.
A: Electric Motors, Gearboxes, Conveyor Systems, Agricultural Machinery.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||