This brass deep groove ball bearing offers superior corrosion resistance and conductivity, ideal for demanding power transmission applications. Engineered for smooth, low-friction rotation, it ensures reliable performance in challenging environments.
| Standard | ASTM A106 |
| Material | Brass |
| Finish | Passivated |
| Grade | N/A |
| Inside Diameter | 94mm |
| Outside Diameter | 168mm |
| Width | 34mm |
Built to exacting engineering tolerances, this brass deep groove ball bearing features an inside diameter of 94mm, an outside diameter of 168mm, and a width of 34mm. The solid brass construction provides excellent resistance to chemical attack and elevated temperatures, making it suitable for corrosive environments and applications requiring electrical insulation or conductivity. Its robust design ensures high load-carrying capacity and extended service life in various power transmission systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean both the bearing and the mating shaft/housing thoroughly. 2. Apply a light coating of appropriate lubricant to the bearing and shaft surfaces. 3. Carefully press or gently tap the bearing into its designated housing or onto the shaft, ensuring it is seated squarely and without excessive force.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying excessive force during installation, leading to brinelling or damage to the raceways. | Utilize a proper bearing press or appropriate driver tools to ensure even pressure distribution during installation. |
| Using the wrong type or insufficient amount of lubricant, resulting in premature wear. | Consult the bearing manufacturer's specifications for recommended lubricants and re-lubrication intervals. |
A: This Deep Groove Ball Bearing is manufactured from Brass.
A: Industrial Gearboxes, Electric Motors, Conveyor Systems, Pumps and Compressors.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||