This premium brass deep groove ball bearing offers exceptional durability and corrosion resistance. Engineered for demanding power transmission, it ensures smooth, reliable operation in challenging environments.
| Standard | ASME B18 |
| Material | Brass |
| Finish | Galvanized |
| Grade | N/A |
| Inside Diameter | 93mm |
| Outside Diameter | 37mm |
| Width | 42mm |
Precision-manufactured to tight tolerances, this brass deep groove ball bearing boasts an inside diameter of 93mm, an outside diameter of 37mm, and a width of 42mm. The inherent properties of brass provide superior resistance to corrosion and chemical attack, making it ideal for applications involving moisture or aggressive substances. Its robust construction ensures high load-carrying capacity and extended service life in demanding industrial settings, including pumps, conveyors, and general machinery. The solid brass construction also contributes to its excellent thermal conductivity.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the bearing housing and shaft are clean and free of debris. 2. Carefully press the bearing onto the shaft, ensuring it is seated squarely. 3. Secure the bearing in the housing using appropriate locking mechanisms.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying excessive force during press-fitting. | Use a hydraulic press or a properly sized bearing installer to apply force evenly to the correct ring (inner ring on shaft, outer ring in housing). |
| Improper lubrication before installation. | Ensure the bearing is adequately lubricated according to manufacturer specifications before and during installation to prevent premature wear. |
A: This Deep Groove Ball Bearing is manufactured from Brass.
A: Industrial Pumps, Conveyor Systems, General Machinery.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||