This robust brass deep groove ball bearing offers exceptional corrosion resistance, making it the preferred choice for challenging power transmission applications. Precisely manufactured for reliable performance.
| Standard | ASME B18 |
| Material | Brass |
| Finish | Passivated |
| Grade | N/A |
| Inside Diameter | 92mm |
| Outside Diameter | 89mm |
| Width | 46mm |
Trusted by engineers across multiple sectors, this deep groove ball bearing is constructed from high-quality brass, renowned for its superior corrosion resistance and excellent conductivity. With an inside diameter of 92mm, an outside diameter of 89mm, and a width of 46mm, it is engineered for precise fit and reliable operation in demanding environments. The brass material ensures longevity in corrosive or high-moisture applications, while the deep groove design accommodates both radial and axial loads efficiently, making it suitable for a wide range of power transmission systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean the shaft and housing bore thoroughly to remove any debris or contaminants. 2. Carefully apply a thin layer of appropriate lubricant to the bearing's inner and outer raceways and the shaft/housing mating surfaces. 3. Press the bearing onto the shaft or into the housing using a suitable press or jig, ensuring even force application and maintaining alignment.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force or impact during installation. | Employ a proper press or jig for controlled, even force application. Avoid hammering. |
| Insufficient or incorrect lubrication. | Ensure the bearing is adequately lubricated with the correct type and amount of grease or oil specified for the application before installation and during its service life. |
A: This Deep Groove Ball Bearing is manufactured from Brass.
A: Industrial Gearboxes, Conveyor Systems, Marine Equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||