This brass deep groove ball bearing offers superior corrosion resistance and excellent heat dissipation. Designed for high-load applications, it ensures smooth, low-friction operation in demanding environments.
| Standard | DIN 933 |
| Material | Brass |
| Finish | Galvanized |
| Grade | N/A |
| Inside Diameter | 90mm |
| Outside Diameter | 49mm |
| Width | 11mm |
Engineered for reliability and performance, this deep groove ball bearing features a 90mm inside diameter, a 49mm outside diameter, and an 11mm width. Constructed from high-quality brass, it exhibits excellent corrosion resistance, making it suitable for environments where moisture or chemical exposure is a concern. The material's inherent ductility also allows for slight deformation under load, contributing to a more even stress distribution and extended bearing life. This design is optimized for radial loads and moderate axial loads, providing consistent and efficient power transmission in various industrial settings.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the shaft and housing bores are clean and free from debris. 2. Carefully press or slide the bearing onto the shaft, applying even pressure to the inner ring. 3. Mount the housing assembly, ensuring the outer ring is properly seated without excessive force.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying force to the outer ring during shaft installation. | Always apply installation force to the inner ring when mounting on the shaft to prevent brinelling and damage. |
| Improper lubrication or contamination during installation. | Use appropriate lubricant and ensure a clean environment to prevent premature wear and failure. |
A: This Deep Groove Ball Bearing is manufactured from Brass.
A: Industrial Gearboxes, Electric Motors, Conveyor Systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||