Engineered for superior performance in power transmission systems, this brass deep groove ball bearing offers exceptional durability and corrosion resistance. Its robust construction ensures reliable operation in demanding environments.
| Standard | DIN 933 |
| Material | Brass |
| Finish | Anodized |
| Grade | N/A |
| Inside Diameter | 89mm |
| Outside Diameter | 48mm |
| Width | 31mm |
Precision-manufactured to tight tolerances, this deep groove ball bearing features an 89mm inside diameter, a 48mm outside diameter, and a 31mm width. Constructed from high-quality brass, it provides excellent resistance to corrosion and chemical attack, making it suitable for applications in humid or chemically aggressive environments. The inherent electrical insulating properties of brass also make it a preferred choice for applications where electrical conductivity is undesirable. This bearing is designed for radial loads and moderate axial loads, offering low friction and high speed capabilities for efficient power transmission in machinery and equipment.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mounting surfaces are clean and free from debris. 2. Carefully press the bearing onto the shaft or into the housing using appropriate tooling to avoid damaging the raceways. 3. Verify smooth rotation and check for any binding or excessive play before applying load.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying excessive force during installation, leading to brinelling or deformation of the raceways. | Use a bearing press or induction heater for controlled installation. Never hammer the bearing directly. |
| Incorrect lubrication leading to premature wear or seizure. | Consult the lubrication guidelines for the specific application and bearing type. Use the recommended lubricant and ensure proper application. |
A: This Deep Groove Ball Bearing is manufactured from Brass.
A: Industrial machinery drives, Conveyor systems, Electric motors.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||