Engineered for superior performance, this brass deep groove ball bearing ensures smooth, low-friction rotation in demanding power transmission systems. Its robust brass construction offers excellent corrosion resistance and conductivity.
| Standard | DIN 933 |
| Material | Brass |
| Finish | Black Oxide |
| Grade | N/A |
| Inside Diameter | 85mm |
| Outside Diameter | 74mm |
| Width | 43mm |
Manufactured under strict quality controls, this deep groove ball bearing features an 85mm inside diameter, 74mm outside diameter, and a 43mm width. Constructed from high-grade brass, it provides exceptional corrosion resistance, good thermal and electrical conductivity, and is ideal for environments where non-sparking properties are beneficial. The deep groove raceway design accommodates radial and axial loads in both directions, ensuring reliable operation in applications such as pumps, gearboxes, and industrial machinery. Its robust design guarantees long service life and minimal maintenance requirements.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the bearing and mating shaft/housing surfaces are clean and free from debris. 2. Carefully press the bearing onto the shaft or into the housing, applying even pressure to the outer or inner ring respectively. 3. Verify proper seating and smooth rotation before applying load.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying force to the wrong ring during installation, leading to premature bearing failure. | Always apply installation force to the ring that is being mounted (inner ring onto shaft, outer ring into housing). |
| Insufficient lubrication or using incorrect lubricant, causing increased friction and wear. | Consult the bearing manufacturer's specifications for appropriate lubricant type and re-greasing intervals. |
A: This Deep Groove Ball Bearing is manufactured from Brass.
A: Industrial Pumps, Gearboxes, Conveyor Systems, Electric Motors.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||