This brass deep groove ball bearing provides robust performance and superior corrosion resistance for demanding power transmission applications. Engineered for reliability and efficiency, it ensures smooth rotational movement.
| Standard | ASME B18 |
| Material | Brass |
| Finish | Galvanized |
| Grade | N/A |
| Inside Diameter | 85mm |
| Outside Diameter | 56mm |
| Width | 40mm |
Manufactured under strict quality controls, this deep groove ball bearing features a precise 85mm inside diameter, a 56mm outside diameter, and a 40mm width. Constructed from high-grade brass, it exhibits exceptional ductility, excellent machinability, and superior resistance to corrosive environments, making it ideal for applications involving mild acids, alkalis, and saltwater. Its design minimizes friction and heat generation, contributing to extended service life and operational efficiency in moderate load conditions.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the bearing seat and shaft are clean and free of debris. 2. Carefully press the bearing onto the shaft or into the housing, applying even pressure to the correct ring. 3. Verify the bearing rotates freely and without excessive play after installation.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying excessive force to the outer ring when mounting on a shaft. | Always apply mounting force to the inner ring when installing on a shaft, or to the outer ring when installing into a housing. |
| Contaminating the bearing during handling or installation. | Handle bearings with clean hands or tools and avoid exposing them to dust, dirt, or moisture. |
A: This Deep Groove Ball Bearing is manufactured from Brass.
A: Electric motors, Pumps, Conveyor systems, Agricultural machinery.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||